Specifications

Austenitic Manganese Steel Castings as per IS 276ASTM - A - 128 ( Hadfield Steel )

IS	Chemical Composition%
Specification	C	Si Max	Mn	Ni	Cr	Mo	S Max	P Max	Bend Test
Gr.1	1.05 1.35	1.0	11.0 14.0	-	-	-	0.06	.09	150°
Gr.2	0.9 1.05	1.0	11.5 14.0	-	-	-	0.06	.09	150°
Gr.3	1.05 1.35	1.0	11.5 14.0	-	1.5 2.5	-	0.06	.09	150°
Gr.4	0.70 1.30	1.0	11.5 14.0	3.0 5.0	-	-	0.06	.09	150°
Gr.5	1.05 1.45	1.0	11.5 14.0	-	-	1.8 2.1	0.06	.09	150°
Gr.6	1.05 1.35	1.0	6.0 8.0	-	-	0.9 1.2	0.06	.09	150°

For all GRADES
Maximum hardness 229 BHN as cast. Work hardens under impact to 400 /450 BHN

We Manufacture:

• Cement Plants

  Cooler Plates, Nose Rings, Tip Casting, Liners, Diaphragms, Hammers, Anvils Inlet and Outlet Grate Sectors, Jaws, kiln, KilnTyre, Supporting Rollers, Blow Bars etc.

• For Mining Industries

  Shovel Teeth, Liners, Tooth Points, Aporns, Bowl Liner & Mantle Liner etc.

• For Thermal Power Plants

  Ring Hammers, Liners, Bull Ring Segments, Mpo's, Lower Skit Assembly etc.

• For Stone Crushers

  Fixed and Swing Jaw plates, side plates, concave, mantelas etc..

• For Steel Industries

  Apron Pan, Lower Mantle, Bowl Liner etc.

• For Engg Industries

  Cast Steel , Mn steel, HRCS , Nihard Castings etc.

Carbon / EN / S.G.Iron Steel Castings as per Indian / International Standards

IS	Chemical Composition %
Specifications	C	Mn	S	P	Si	Cr	Ni	Mo	Cu / V
IS 1030 I	0.25 0.35	0.60 0.80	0.05 MAX	0.05 MAX	0.60 MAX
IS 1030 II	0.20 0.25	0.70 1.20	0.05	0.05	0.60
IS 1030 GR 27-54	0.27 0.35	1.00 1.20	0.05	0.05	0.60
IS 1030 GR 23-45	0.23 0.26	0.80 1.10	0.05	0.05	0.40 0.60
IS 1030 GR 26-52	0.28 0.32	0.90 1.10	0.04	0.04	0.60
IS 1030 GR 30-57	0.35 0.40	0.80 1.00	0.05	0.05	0.60
IS 1030 GR 34-57	0.35 0.40	0.80 MAX	0.05	0.05	0.60
IS 1030 GR 26-52	0.27 0.35	1.00 1.20	0.05	0.05	0.60
IS 1030 GR 20-40	0.23 0.25	0.70 1.20	0.05	0.05	0.60
IS 2707 GR I	0.40 0.48	1.00 MAX	0.05	0.05	0.60
IS 2707 GR II	0.39 0.45	1.00 1.40	0.05	0.05	0.30 0.60
IS 2708 GR I	0.18 0.25	1.20 1.60	0.05	0.05	0.60
IS 2708 GR I	0.25 0.33	0.25 0.33	1.20 1.60	0.05	0.60
IS 2708 GR III	0.20 0.38	1.20	0.05	0.05	0.60
IS 2708 GR III (SP)	0.25 0.33	1.20 1.60	0.05	0.05	0.60	0.30	0.40	0.20	CU 0.3 V   0.25

Carbon / EN / S.G.Iron Steel Castings as per Indian / International Standards

IS	Chemical Composition %
Specifications	C	Mn	S	P	Si	Cr	Ni	Mo	Cu / V
EN 2	0.2	0.3 0.6	0.04	0.04	0.3
EN 2B	0.12 0.18	0.3 0.6	0.04	0.04	0.3
EN 3	0.25	1.0	0.06	0.06	0.05 0.35
EN 3A	0.15 0.25	0.4 0.9	0.06	0.06	0.05 0.35
EN 4	0.2 0.3	1.0	0.06	0.06	0.35
EN 4 A	0.3	1.0	0.06	0.06	0.05 0.35
EN 5	0.25 0.35	0.6 1.0	0.06	0.06	0.05 0.35
EN 6	0.4	0.5 0.9	0.06	0.06	0.05 0.35
EN 7	0.1 0.3	0.7 1.3	0.06	0.18	0.35
EN : 8	0.35 0.45	0.60 1.00	0.06	0.06	0.050 0.350
EN 8 M	0.35 0.45	0.9 1.1	0.07	0.2	0.25
EN : 9	0.50 0.60	0.50 0.50	0.05	0.05	0.60
EN 10	0.5 0.6	0.5 0.8	0.06	0.06	0.05 0.35		0.5 0.8
EN 11	0.5 0.7	0.5 0.8	0.05	0.05	0.35	0.5 0.8
EN 12	0.3 0.45	1.5	0.05	0.05	0.1 0.35		0.6 1.0

Carbon / EN / S.G.Iron Steel Castings as per Indian / International Standards

IS	Chemical Composition %
Specifications	C	Mn	S	P	Si	Cr	Ni	Mo	Cu / V
EN 19	0.35 0.45	0.5 0.8			0.1 0.35	0.9 1.5		0.2 0.4
EN 19 A	0.35 0.45	0.5 0.8			0.1 0.35	0.9 1.2		0.2 0.35
EN 19 B	0.35 0.40	0.5 0.8			0.1 0.35	0.9 1.2		0.2 0.35
EN 19 C	0.4 0.45	0.5 0.8			0.1 0.35	0.9 1.2		0.2 0.35
EN 20	0.22 0.5	0.4 0.7			0.1 0.35	0.5 1.5	0.3	0.4 1.0
EN 21	0.25 0.35	0.5 0.8			0.1 0.35	0.3	2.75 3.50
EN 22	0.35 0.45	0.5 0.8			0.1 0.35	0.3	3.25 3.75
EN 23	0.25 0.35	0.45 0.7			0.1 0.35	0.5 1.0	2.75 3.5	0.3
EN 24	0.35 0.45	0.45 0.70	0.05	0.05	0.10	0.90	1.38 1.80	0.20 0.30
EN 31	0.9 1.1	1.1	0.05	0.05	0.1 0.35	1.0 1.5		0.3 0.5

Heat Resistant Alloy Steel Castings as per IS 4522 & ASTM - A 297

IS	Chemical Composition %
Specifications	C	Si Max	Mn Max	Ni	Cr	S Max	P Max
Gr 1	0.4	2.0	1.0	-	12.14	0.05	0.05
Gr 2	0.31 0.6	2.0	1.0	-	27.30	0.05	0.05
Gr 3	1.20 1.40	2.0	1.0	-	27.30	0.05	0.05
Gr 4	0.20 0.50	2.0	1.0	4.0 7.0	26.0 30.0	0.05	0.0005
Gr 5	0.20 0.50	2.0	2.0	8.0 10.0	18 20	0.05	0.0005
Gr 6	0.20 0.50	2.0	2.0	8.0 10.0	26.0 30.0	0.05	0.0005
Gr 7	0.20 0.50	2.0	2.0	11.0 14.0	23.0 27.0	0.05	0.0005
Gr 8	0.15 0.35	2.5	1.5	13.0 15.0	19.0 21.0	0.05	0.0005
Gr 9	0.20 0.50	2.0	2.0	18.0 22.0	23.0 27.0	0.05	0.0005
Gr 10	0.20 0.60	2.5	2.0	18.0 22.0	28.0 32.0	0.05	0.0005
Gr 11	0.20 0.50	2.0	2.0	23.0 27.0	19.0 23.0	0.05	0.0005
Gr 12	0.35 0.75	2.5	2.0	33.0 37.0	13.0 17.0	0.05	0.0005
Gr 13	0.35 0.75	2.5	2.0	37.0 41.0	17.0 21.0	0.05	0.0005
Gr 14	0.35 0.75	2.5	2.0	64.0 68.0	15.0 19.0	0.05	0.0005

ITEMS	Cooler Grate Plates	For	CEMENT INDUSTRY
	Segmental tips		FURNACE MANUFACTURERS
	Trays		STEEL PLANTS
	Lifters
	Lepol Plates
	Furnace Fixtures
	Kiln Parts

Products

Enquiry

Contact Now